Inspection · 2026-02-23
Date
2026-02-23
Complaint Related
No
Licensing Inspector
Cathy Aylor
(540) 222-6352
(540) 222-6352
SHSIA monitoring inspection of an approved subsidy vendor to determine compliance with current subsidy requirements regarding the health and safety of children and to promote quality standards for the children in their care.
Yes
Violations
3Standard 8VAC20-780-160-A
Each staff member and individual from an independent contractor shall submit documentation of a negative tuberculosis screening. The documentation shall have been completed within the last 30 calendar days of date of employment.
Staff A's tuberculosis test was 5 months prior to employment and staff B's tuberculosis test was 5.5 months prior to employment.
Staff A's tuberculosis test was 5 months prior to employment and staff B's tuberculosis test was 5.5 months prior to employment.
Plan of Correction: We will get up to date tuberculosis tests.
Standard 8VAC20-780-270-A
Areas and equipment of the center, inside and outside, shall be maintained in a safe and operable condition.
A tricycle on the preschool playground was missing hand grips, which presented finger entrapment hazard.
A tricycle on the preschool playground was missing hand grips, which presented finger entrapment hazard.
Plan of Correction: We will remove the tricycle from the playground until we can purchase the hand grips.
Standard 8VAC20-780-330-B
Repeat Violation:
Where playground equipment is provided, resilient surfacing shall comply with minimum safety standards when tested in accordance with the procedures described in the American Society for Testing and Materials standard F1292-99 and shall be under equipment with moving parts or climbing apparatus to create a fall zone free of hazardous obstacle.
The portable climber/slide was within 2 feet of the metal awning pole. The standards require at least 6 feet clearance.
Where playground equipment is provided, resilient surfacing shall comply with minimum safety standards when tested in accordance with the procedures described in the American Society for Testing and Materials standard F1292-99 and shall be under equipment with moving parts or climbing apparatus to create a fall zone free of hazardous obstacle.
The portable climber/slide was within 2 feet of the metal awning pole. The standards require at least 6 feet clearance.
Plan of Correction: We will reposition the climber/slide to ensure at least 6 feet of fall zone.